A high torque electronic motor positioned perpendicular to a base plate for the propose of tapping holes. The motor is buoyant and free floating so as to be able to feed itself into and out of a hole when tapping it will stay perpendicular to the base plate but allow X and Y linear changes…
Month: November 2021
String Cutter
An automated Standalone String cutter. it uses a 12v barrel connector PSU, Arduino nano, 2x nema 17 stepper motors, 2x drv8825 drivers, a hm11 BLE module and a PCB to connect everything. The rest is 3d printed. Quarters are stacked on top of a razor blade and raised. string is fed from a stepper to…
Drone parachutes
A series of drone parachutes I designed, produced, and sold. Ranging from 36″ in diameter to 120″ in diameter with passive or active deployment up to a 70lb compressed spring that not only moved the parachute away from the drone but reduced the altitude needed to open.
Software
Some Windows programs I have made. Blackjack – https://github.com/krash999/blackjack KkroppSync – https://github.com/krash999/kkroppsync Mayday software – http://maydayboards.com/downloads/ Zeroset center calculator – https://github.com/krash999/zeroset Zeroset web based – Zeroset
Electronics Case
Design of a case to house electronics. 3d printed for initial testing. mold design and production with injection molding for large scale distribution.